Square‐Wave Voltammetry of Electroinactive Surfactants

Under the influence of previously published and some new theoretical results, potential‐ dependent adsorption and desorption of model electroinactive surfactants Triton X‐100 (T‐X‐100 or polyethylene glycol p‐(1,1,3,3‐tetramethylbutyl)‐phenyl ether) and sodium dodecyl sulfate (SDS) on the static mercury drop electrode (SMDE) were studied by square‐wave voltammetry (SWV). Although (according to the theory) the resulting current – potential curve should consist of two highly separated peaks, only desorption signal could be seen on each experimentally obtained voltammogram, most probably because of the limitations concerning the available potential range. Different properties of the recorded peak are in good agreement with the theory indicating that square‐wave voltammetry could be treated as a potential tool for tensammetric studies of electroinactive surface active substances.     

横观各向同性体应力波传播问题的特征分析

本文根据广义特征理论,对横观各向同性体轴对称弹性波传播问题进行了理论分析。提出了一个简化特征分析的方法,这种方法将成为应用特征线法求解各类各向异性应力波问题的一个突破口。     

Unraveling the electronic structure of transition metal dimers using resonant four‐wave mixing

The potential of two‐color resonant and degenerate four‐wave mixing spectroscopy for investigations of the complex spectra of transition metal dimers is explored. Two‐color resonant and degenerate four‐wave mixing spectroscopy scans of the well‐known A‐X and B‐X transitions in Cu₂ are reported and compared with previous experimental data obtained from standard single‐resonance techniques. The selectivity of the method is shown to enable the measurement of isotopologue pure spectra without the need for isotopically enriched metal targets. Specific subsets of the rovibronic structure are separated in a congested spectral region of overlapping transitions. The sensitivity of the method compares satisfactorily with linear spectroscopic methods such as laser‐induced fluorescence and cavity ring‐down. A new laser vaporization source for the production of transition metal dimers and clusters has been constructed. The new design aims for a high number density and maximum possible shot‐to‐shot stability. The possibilities of further applications of non‐linear four‐wave mixing spectroscopy to Cu₂ and other transition metal dimers are discussed. Copyright © 2015 John Wiley & Sons, Ltd.     

促进其线性频散特征另一种形式的Bousinesq方程

Ｂｏｕｓｉｎｅｓｑ方程能够用于模拟表面重力波传播过程中的折射、绕射、反射以及浅化，非线性作用等现象．用不同垂直积分方法所得到的二维Ｂｏｕｓｓｉｎｅｓｑ方程形式具有不同的线性频散特征．采用两个不同的水深层的水平速度变量组合，推导出一个新形式的Ｂｏｕｓｉｎｅｓｑ方程．通过对其参数的设置可得到精确的线性频散解Ｐａｄｅ近似４阶精度．其适用范围已由原来的浅水，向深水拓进．相速误差小于２％，其拓展适用范围可达到０８个波长水深．应用所得到的新型Ｂｏｕｓｉｎｅｓｑ方程，采用有限差分法，对经典工况进行了数值模拟，其计算结果表明，计算值与物模实验值吻合较好．这说明本文新形式的Ｂｏｕｓｓｉｎｅｓｑ方程对变水深非线性效应所产生的能量频散有着较为精确的描述     

Interaction of shock waves during the passage of a disrupted meteoroid through the atmosphere

The motion of fragments following disintegration of a meteoroid during its flight through the Earth's atmosphere is investiated. Shock wave configurations, aerodynamical forces and moments acting on each fragment and the trajectories of the pieces are determined for hypothetical initial configurations. The results of numerical simulations show that a meteoroid's breakup may lead to both increase and decrease of the total cross section, drag forces and energy release in the atmosphere. As a consequence the emitted radiation varies.     

Propagation of Normal Axisymmetric Waves in Compliant Elastic Cylinders Filled with and Immersed in a Fluid

The paper studies the relationship between the physical characteristics of a cylinder and the properties of normal axisymmetric waves in elastic–liquid waveguides. The cylinder is made of a compliant material in which the velocity of shear waves is less than the sonic velocity in a perfect compressible liquid. The complete system of dynamic elasticity equations and the wave equation are used to describe the wave fields in the elastic cylinder and fluid, respectively. This approach allows obtaining the dispersion characteristics of coupled normal waves in compound waveguides over wide ranges of frequencies and wavelengths. The curves of real, imaginary, and complex wave numbers versus frequency are plotted for specific pairs of waveguide materials. Computations are carried out for a thick-walled cylinder filled with a fluid and immersed in either vacuum or a fluid. It is found out that compliant and rigid materials of the cylinder affect differently the wave interaction process in elastic–liquid waveguides     

双驱动激波管稀疏波破膜技术研究

本文介绍了在双驱动激波管中运用稀疏波破膜的技术。在以压缩空气和氮气作实验气体的情形下,实验研究了中间段长度、稀疏波强度及中间段B膜的破膜压力（压差）对第二激波追韩第一激波的影响。实验结果表明：中间段的长短,显著地制约着前后两道激波的间隔;稀疏波强度及中间段B膜的破膜压力对稀疏波破膜时间及第二激小对反射稀疏波的追赶有重要影响。     

On Free Nonlinear Vibrations of Fluid-Filled Cylindrical Shells with Multiple Natural Frequencies

Nonlinear free vibrations of a cylindrical shell fully filled with a perfect incompressible fluid are studied. The case is examined where two natural frequencies of the shell are close __________ Published in Prikladnaya Mekhanika, Vol. 41, No. 10, pp. 127–138, October 2005     

Dynamic compressive strength properties of aluminium foams. Part I—experimental data and observations

This study of the dynamic compressive strength properties of metal foams is in two parts. Part I presents data from an extensive experimental study of closed-cell Hydro/Cymat aluminium foam, which elucidates a number of key issues and phenomena. Part II focuses on modelling issues.The dynamic compressive response of the foam was investigated using a direct-impact technique for a range of velocities from 10 to . Elastic wave dispersion and attenuation in the pressure bar was corrected using a deconvolution technique.A new method of locating the point of densification in the nominal stress-strain curves of the foam is proposed, which provides a consistent framework for the definition of the plateau stress and the densification strain, both essential parameters of the ‘shock’ model in Part II. Data for the uniaxial, plastic collapse and plateau stresses are presented for two different average cell sizes of approximately 4 and 14 mm. They show that the plastic collapse strength of the foam changes significantly with compression rate. This phenomenon is discussed, and the distinctive roles of microinertia and ‘shock’ formation are described. The effects of compression rates on the initiation, development and distribution of cell crushing are also examined. Tests were carried out to examine the effects of density gradient and specimen gauge length at different rates of compression and the results are discussed. The origin of the conflicting conclusions in the literature on the correlation between nominal strain rate (ratio of the impact velocity V_i to the initial gauge length l_o of the specimen) and the dynamic strength of aluminium alloy foams is identified and explained.     

冲击消振器的概周期碰振运动分析

建立了冲击消振器对称周期运动的Poincar啨映射方程 ,讨论了对称周期运动的稳定性与局部分岔。通过数值仿真研究了冲击消振器在非共振、弱共振和强共振条件下的概周期碰振运动及其向混沌的转迁过程。